奥亚特蓄电池|奥亚特可充电电池Co., Ltd
奥亚特蓄电池日常须对下述几方面注意
发布时间：2019-12-16 文章阅读：495次
奥亚特蓄电池日常须对下述几方面注意：
①注意蓄电池充电工作标准电压的范围浮充运用时工作标准电压一般控制在2.15±0.1V/单格，循环运用时工作标准电压一般控制在2.35±0.1V/单格，若使用说明书有要求时要按使用说明书操作过程。
②注意运用操作温度，一般不超过三十度为宜。温度变化非常大时要提高对工作标准电压的调节。
③对于不一样生产商的产品不可以互用，同一生产商的产品新老用户不可以互用。
④密闭性阀控铅酸蓄电池奥亚特蓄电池无须本身打开后盖板弥补锂电锂电池电解液和拆卸闸阀。
奥亚特可充电电池重要堵盖、正负极板、隔板，锂电锂电池电解液在电场作用下将电能转变为分析化学电能储存，又将分析化学电能变成直流稳压电源能，并可持续进行数次电瓶充电循环的一种机器设备，电化学反应式为：
上式获知奥亚特可充电电池是一个复杂的电化学反应体系管理，奥亚特电池性能使用期长短取决于生产加工正负极板的原料，制作工艺地理环境、活性物质纯度构成构成及运用地理环境和维修保养等有很重要的伤害。
Professional characteristics
This series of rechargeable batteries are produced and processedby the patented invention of Hawke: the unique secret formula ofpole / pole piece aluminum alloy profile, fully automatic controland exquisite production and manufacturing process make therechargeable battery have extraordinary battery chargingcharacteristics.
Closed structure, no need to add acid and water for maintenance.No acid leakage, no organic waste gas discharged, corrosionresistance to mechanical equipment and geographical environment,zero environmental pollution.
The deep cycle battery has good charging characteristics, andthe charging cycle times of deep cycle battery are more than 3times of that of general lead-acid battery lithium battery.
After deep-seated battery charging, the performance index can berecovered, and the battery charging time can be reduced byaccepting the large total current (0.2c10) battery charging.
It can be used in all kinds of high temperature environment.
This product series of Hawke batteries is fully based on therigorous testing of specifications, including electrical testingand fracture toughness testing. The fracture toughness test is inaccordance with "fordtm vibration test standard for mobilemachinery" and "iec61373 shock and vibration test standard".
IEC 61373 shock and vibration test standard
Ecological random vibration test iec61373, Section 8, 10 minutethree-dimensional vibration, frequency 5-150hz, 0.046-0.1g gravityacceleration;
Long term random vibration test iec61373, section 9, 5-hourthree-dimensional vibration, frequency 5-150hz, 0.36-0.8g gravityacceleration;
Destructive test iec61373, section 10, 30ms three-dimensionaldestructive, destructive tensile strength 3.06-5.1g gravityacceleration.
Attention should be paid to the following aspects when usinglithium battery:
During mobile operation, the anti-seismic grade pad should beadded near the rechargeable battery to maintain the rechargeablebattery;
For long-term shallow storage battery charging, deep-seatedbattery charging (0.1c10a, battery charging for more than 8 hours)should be carried out in most half a year;
The battery should be charged immediately after deep charging(more than 60%) to avoid potassium thiocyanate of rechargeablebattery electrode plate;
● each time the battery is charged, it should be used after itis fully paved, and it is not allowed to under charge;
Select a suitable battery charger to charge the battery. Do notcharge the battery with over-voltage or over current flow!
New and old rechargeable batteries cannot be mixed!
There should be enough space between rechargeable batteries forheat dissipation!
Proper battery charging: increase service life and reducebattery charging time
1. Battery charging method is the prerequisite for proper andeffective use of battery charging lithium battery. For portableindustrial equipment, the appropriate design and application ofcharging plug is related to the utilization rate and service lifeof rechargeable battery.
It is highly recommended to use IUU three-step battery chargingmethod: after charging the battery with step constant current powersupply, follow two steps of DC power battery with different workingstandard voltage, until the current drops below 0.006c10 (a) andremains unchanged, it is regarded as fully charged.