JENON电瓶|聚核蓄电池充电锂电池Co., Ltd
抗冲击性好：彻底电瓶充电情况的蓄电池充电锂电池从二十厘米高空当然降落至一厘米厚的坚硬实木板材上3次无漏夜，无蓄电池充电锂电池膨涨及裂开，开路电压一切正常。
耐过电瓶充电性好：25℃，彻底电瓶充电情况的蓄电池充电锂电池开展定电阻器电瓶充电三星期（电阻器只等同于该蓄电池充电锂电池1CA电瓶充电规定的电阻器），修复容积在75%之上。
耐电瓶充电性好：25℃，彻底电瓶充电情况的蓄电池充电锂电池0.1CA电瓶充电二天，无漏夜，无蓄电池充电锂电池膨涨及裂开，开路电压一切正常，容积保持率在95%之上。
耐大电流量性好：彻底电瓶充电情况的蓄电池充电锂电池2CA电瓶充电五分钟或10CA电瓶充电5秒左右，无导电性一部分融断，无外型形变。
阀控密封性，偶经历电瓶充电，乙炔气体体乙炔气体乙炔气体汽体能够释放出来。
电镀金铜接线端子导电率高质量，产品商品产品商品产品商品产品商品产品造型设计别具一格。
特别是在制作吸酸挡板，将锂电池在这儿在这儿在这里在其中。
蓄电池充电锂电池存储2年，还可再一次应用。
三维方位蓄电池充电锂电池可随意应用。
与众不同的专业能力解决，保证 电池电压平衡一致。
有效的设计方案和 选料保证 蓄电池充电锂电池寿命长。
三年长期性完全免费保存期
二、运用范畴
合适在中国宽带、电力安装工程项目和UPS的应用。
Battery charging mode of poly nuclear rechargeable battery
The appropriate battery charging method is constant currentsource over-current protection battery charging method (regardlessof floating charge, uniform charge, or battery charging statusafter charging and discharging), so it is highly recommended to usecharging head with constant current source over-current protectionfunction!
1. The rechargeable battery must be charged before the capitalis put into operation. The charging battery should be charged underthe current limit of constant current source. The starting andending current is limited to 0.08c10 (a) (for example, C10 is a1000ah rechargeable battery, 0.08 C10 = 0.08 × 1000 = 80 (a)). Whenthe indoor temperature is 25 ℃, the working voltage of rechargeablebattery is limited to 2.25v-2.28v/module rechargeable battery. Theworking voltage of battery charging should be adjusted with thechange of working temperature (see Table 1). It is stronglyrecommended that the charging time of the battery should be 24-48huntil the current is a stable value, generally less than 1 m a / ah(C3). If the deep charging and discharging experiment should becarried out before the charging battery C is delivered for use, thecontinuous battery charging for 6 days should be less after theexperiment.
2. In order to avoid the sexual damage and volume damage of therechargeable battery (due to the ineffective condensation of leadoxide, it is impossible to completely restore the composite type,resulting in reduced volume damage), after all charging anddischarging, the battery charging should be started immediately,and for a long time, it should not exceed 24 hours. When the indoortemperature is 25 ℃, the lithium battery pack is charged with0.08c10 (a) constant current flow. When the average working voltageof the rechargeable battery increases to 2.26v, the battery ischanged to 2.26v/module to charge the constant current sourcebattery. When the current is stable at a small stable value anddoes not change for 3 hours, the lithium battery pack is full. Theworking voltage of battery charging should be adjusted with thechange of working temperature (see Table 1).
3. Fast charging. When the working voltage of the battery isincreased to 2.40v/module, the charging time can be reduced. Thestarting and stopping current limit is 0.15c10 (a). When theworking voltage of battery charging reaches the specified value andthe current lasts for 3 hours, the battery charging will bestopped.
4. The floating charging voltage of the rechargeable battery is2.25v-2.28v/module rechargeable battery at room temperature of 25℃.
In order to better ensure the rated characteristics ofrechargeable batteries, the floating charging working voltageshould be adjusted with the change of temperature (see Table 1).Poly nuclear battery
Temperature (℃) battery charging working voltage (V)
0 2.33-2.36
10 2.30-2.33
20 2.27-2.30
25 2.25-2.28
30 2.24-2.27
35 2.22-2.25
40 2.21-2.24
T